| Част Не | Производител | Заявление |
|---|
| MAX505AEAG | MaximIC | Quad 8-bit DAC with Rail-to-Rail voltage outputs. Double-buffered logic inputs. TUE +-1 LSB. |
| MAX709TCUA | MaximIC | Power-supply monitor with reset. Reset threshold voltage 3.08V |
| MAX6341CPA | MaximIC | Low-noise, +4.096V voltage reference. Max tempco 1.0ppm/C |
| MAX6315US27D4-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.70V. Reset timeout period(min) 1120ms. |
| MAX6314US39D4-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 3.90V. Reset timeout period(min) 1120ms. |
| MAX6317HUK46CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX3491CSD | MaximIC | 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver. Guaranteed data rate 10Mbps. Supply voltage 3.0V to 3.6V |
| MAX6318LHUK35CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.500V min, reset timeout 140ms,typ watchdog timeout 1.6sec |
| MAX6320PUK36CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX4611CSD | MaximIC | Low-voltage, quad, SPST, CMOS analog switches (four NC switches). |
| MAX4579CWP | MaximIC | High-voltage, dual 4-to-1 cal-multiplexer. |
| MAX1291BEEI | MaximIC | 250ksps, +3V, 8-channel single-ended/4channel pseudo-differential, 12-bit ADC with +2.5V reference and parallel interface INL(LSB) +1,-1 |
| MAX4274BAEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 10, 1+ (Rf/Dg) noninverting gain 11, -3dB BW 560kHz. |
| MAX500BCWE | MaximIC | CMOS, quad, serial-interface 8-bit DAC. Error(LSB) +-2. |
| MAX326CJE | MaximIC | Quad, SPTS, ultra-low leakage, CMOS analog switch. |
| MX7228K/D | MaximIC | CMOS octal 8-bit D/A converter. Error +-2 LSB |
| MX674AK/D | MaximIC | Industry standard complete 12-bit A/D converter. 15 microsec. max conversion time. Linearity (LSBs) 1/2. |
| MAX414BCPD | MaximIC | Quad, 28MHz, low-noise, low-voltage, precision op amp. |
| MAX709LCUA | MaximIC | Power-supply monitor with reset. Reset threshold voltage 4.65V |
| MAX206ECNG | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX2683EUE | MaximIC | 3.5GHz downconverter mixer with selectable LO doubler.. |
| MAX6318LHUK28DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.800V min, reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX291EPA | MaximIC | 8th-order, lowpass, switched-capacitor filter. |
| MAX6319MHUK33D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 1120ms |
| MAX303CJE | MaximIC | Precision, dual, high-speed analog switch. |
| IH5047CPE | MaximIC | General-purpose CMOS analog switch. Quad pole, single throw (4PST) |
| MAX391EJE | MaximIC | Precision, quad, SPST analog switch |
| MAX176BCWE | MaximIC | Serial-output, 250 ksps 12-bit ADC with T/H and reference. Error(LSB) +-1. |
| MX7521JN | MaximIC | CMOS 12 bit multiplying D/A converter. Error 0.2% |
| MAX801MESA | MaximIC | Supervisory circuit with +-1.5% reset accuracy. Reset threshold(typ) 4.425V. Watchdog. |
