| Част Не | Производител | Заявление |
|---|
| MXD1005UA150 | MaximIC | 5-tap silicon delay line |
| MAX1631CAI | MaximIC | Multi-output, low-noise power-supply controller for notebook computers. |
| MAX241EWI | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX3222EWN | MaximIC | 3.0V to 5.5V, low-power, up to 1Mbps, true RS-232 transceiver using four 0.1microF external capacitor. Low supply current 300microA. Guaranteed data rate 120kbps. |
| MAX6315US26D1-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 2.63V. Reset timeout period(min) 1ms. |
| MAX3110EEWI | MaximIC | SPI/MICROWIRE-compatible UART and +-15kV ECD-protected RS-232 transceiver with internal capacitor. Single-supply operation +5V. Vcc (V) 5 |
| MAX1490BEPG | MaximIC | Complete, isolated RS-485/RS-422 data inteface. |
| MAX6319MHUK36B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 20ms |
| MAX6321HPUK30DW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX6318LHUK41BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.100V min, reset timeout 20ms,typ watchdog timeout 6.3ms |
| MAX6347XR41-T | MaximIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.100V. Order increment 10k |
| MAX165BEPN | MaximIC | CMOS microprocessor-compatible, 5 microsec, 8-bit ADC. Error +-1 LSB. Plug-in upgrade to the MX7575. |
| MAX186CEPP | MaximIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX170DEWE | MaximIC | Serial output 5.6 microsec 12-bit A/D converter. Error +-1 LSB. |
| MAX6321HPUK45BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX491CSD | MaximIC | Low-power, slew-rate-limited RS-485/RS-422 transceiver. Full-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
| MAX1246AEPE | MaximIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX6310UK43D1-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 4.193(min),4.408(max). Nominal timeout period 1ms. |
| MAX6315US39D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.90V. Reset timeout period(min) 20ms. |
| MAX6317HUK39BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6318MHUK45BW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX6375UR29-T | MaximIC | Ultra-low-power voltage detector, 2.9V |
| MAX6317HUK49DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1120ms, typ watchdog timeout 1.6sec |
| MAX192ACAP | MaximIC | Low-power, 8-channel, serial 10-bit ADC. Error(LSB) +-1/2. |
| MX7520JD | MaximIC | CMOS 10 bit multiplying D/A converter. Error 0.2% |
| MAX6316LUK25CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6315US33D3-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.30V. Reset timeout period(min) 140ms. |
| MAX900ACWP | MaximIC | High-speed, low-power voltage comparator |
| MAX6316LUK38BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX3244CAI | MaximIC | 1microA supply current, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus |
