| Част Не | Производител | Заявление |
|---|
| MAX281BEWE | MaximIC | 5th-order, zero-error, bessel lowpass filter. |
| MAX6316LUK49DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reser input,reser output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.900V, min reset timeout 1120ms, typ watchdog timeout 25.6sec |
| MXL1178ACN8 | MaximIC | 17microA max, dual, single-supply precision operational amplifier. |
| MAX6328UR23-T | MaximIC | Ultra-low-power microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 2.320V. Standard version. Order increment 2.5k |
| MAX6363LUT46-T | MaximIC | Low-power microprocessor supervisory circuit with battery-on output. Reset threshold(typ) 4.63V. Active-low push-pull reset. |
| MAX771CPA | MaximIC | 12V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX6310UK31D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.003(min),3.157(max). Nominal timeout period 20ms. |
| MAX4075ACESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 0.5V/V, noninverting gain 1.5V/V, -3dB BW 136kHz. |
| MAX534BCPE | MaximIC | 5V, low-power, 8-bit quad DAC with Rail-to-Rail output buffer. INL (LSB) +-2 |
| MAX489MJD | MaximIC | Low-power, slew-rate-limited RS-485/RS-422 transceiver. Full-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 32. |
| MAX6322HPUK46B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 20ms |
| MAX6336US18D3-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, push/pull . Reset threshold(typ) 1.8V, reset timeout(min) 100ms. Standard version |
| MAX384C/D | MaximIC | Low-voltage, dual 4-channel multiplexer with latchable inputs. |
| MXD1005PA75 | MaximIC | 5-tap silicon delay line |
| DG412DY | MaximIC | Improved, quad, SPST analog switches |
| MAX6321HPUK42CY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX202EEPE | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| DG401DJ | MaximIC | Improved, dual, SPST, NO high-speed analog switch. |
| MAX4700EPE | MaximIC | 1.25om, quad, SPST, CMOS analog switch (one NC and one NO switches). |
| MAX870C/D | MaximIC | Switched-capacitor voltage inverter. Input voltage range +1.4V to +5.5V. 0.7mA quiescent current. 125kHz |
| MAX6318MHUK38DY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX4593CUE | MaximIC | High-speed, single-supply 12V, quad, SPST analog switches (two NO and two NC switches). |
| MAX6344SUT-T | MaximIC | Microprocessor reset circuit with power-fail comparator. Reset threshold 2.93V. Push-pull active-high reset output, manual-reset input. |
| MAX6318MHUK39AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX3867ECM | MaximIC | +3.3V, 2.5Gbps, SDH/SONET, laser driver with automatic power control. |
| MAX771MJA | MaximIC | 12V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX182AMJI | MaximIC | Calibrated 4-channel 12-bit ADC with T/H and reference. |
| MAX1685EEE | MaximIC | Low-noise, 14V input, 1A, PWM step-down converter. |
| MAX6316MUK41BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.100V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MXD1005C/D60 | MaximIC | 5-tap silicon delay line |
