| Част Не | Производител | Заявление |
|---|
| MAX6317HUK33AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.300V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX780AEAG | MaximIC | Dual-slot PCMCIA analog power controller. Reference & Vpp status indicator. Register for direct connection to CPU data bus. Dual Vpp switches & level shifter for Vcc switching. |
| MAX6309UK47D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 4.583(min),4.818(max) Nominal timeout period 1120ms. |
| MAX501ACNG | MaximIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-1/2. |
| MAX6309UK35D2-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.413(min),3.588(max) Nominal timeout period 20ms. |
| MAX311EJN | MaximIC | CMOS RF/video multiplexer (2-of-8, 4 channel differential). |
| MAX6363PUT23-T | MaximIC | Low-power microprocessor supervisory circuit with battery-on output. Reset threshold(typ) 2.32V. Active-low open-drain reset. |
| MAX6317HUK50AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX6320PUK26DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| ICL7107CJL | MaximIC | 3 1/2 digit a/d converter |
| MAX125BCAX | MaximIC | 2x4-channel, simultaneous-sampling 14-bit DAS. INL (LSB) +4,-4 |
| MAX149BCAP | MaximIC | +2.7V to +5.25V, low-power, 8-channel, serial 10-bit ADC. INL(LSB) +-1. |
| MAX4274ALEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 5, 1+ (Rf/Dg) noninverting gain 6, -3dB BW 790kHz. |
| MAX6322HPUK35D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 1120ms |
| MAX6312UK37D4-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.608(min) 3.793(max). Nominal timeout period 1120ms. |
| DG508ACJ | MaximIC | Monolithic CMOS analog multiplexer. Single 8-channel (1-of-8). |
| MAX6320PUK45DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX6318LHUK43CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.300V min, reset timeout 140ms,typ watchdog timeout 6.3ms |
| MAX5013BEPI | MaximIC | 12-bit, 100Msps TTL DAC. |
| MAX6318MHUK35BW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.500V, reset timeout(min) 20ms, watchdog timeout(typ) 6.3ms |
| MAX777LCSA | MaximIC | Low-voltage input, step-up DC-DC converter |
| MAX4632MJE | MaximIC | Fault-protected, high-voltage, dual analog switch (two NO/NC SPDT switches). Fault protection +-40V with power off, +-25V with +-15V supplies. |
| ICL7135C/D | MaximIC | 4-1/2 digit A/D converter with multiplexed BCD outputs |
| MAX6320PUK40BX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX167BMRG | MaximIC | CMOS 12-bit A/D converter with track-and-hold. Error +-1 LSB. |
| MAX6316LUK50DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reser timeout 1120ms, typ watchdog timeout 1.6sec. |
| MAX817LCSA | MaximIC | +5V microprocessor supervisory circuit. Reset threshold 4.65V, active-low reset, backup-battery switchover, power-fail comparator, watchdog input, battery freshness seal. |
| MAX549AEPA | MaximIC | +2.5V to +5.5V, low-power, dual, 8-bit voltage-output DAC with an external reference input. |
| MAX6316MUK38BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6306UK28D4-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 2.730(min),2.870(max) Nominal timeout period 1120ms. |
