| Част Не | Производител | Заявление |
|---|
| MAX6316LUK37AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.700V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6318MHUK29BX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX6319MHUK28D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1120ms |
| MAX6320PUK33BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 20ms, watchdog timeout(typ) 1.6sec |
| MAX6317HUK30DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.000V, min reset timeout 1120ms, typ watchdog timeout 102ms |
| MAX6320PUK33BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.300V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX961EUA | MaximIC | Single, ultra-high-speed, +3V or +5V, Beyond-the-Rails comparator. Complemehtary output. 270microA shutdown current. Latch enable. |
| MAX325CSA | MaximIC | Precision, single-supply, SPST analog switch. |
| MAX174ACPI | MaximIC | Industry standard complete 12-bit A/D converter. 8 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO (ppm/C) 10. |
| MAX6317HUK50AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 5.000V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX207ECWG | MaximIC | +-15kV ESD-protected, +5V RS-232 transceiver |
| MAX6332UR24D1-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit Reset threshold(typ) 2.4V, reset timeout(min) 1ms |
| MAX6321HPUK25BX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX4200EUK-T | MaximIC | Ultra-high-speed 780MHz -3dB bandwidth, 280MHz 0.1dB gain flatness, low-noise, low-power, open-loop buffer. |
| MAX379CPE | MaximIC | High-voltage, fault-protected analog multiplexer. |
| MAX502AEWG | MaximIC | Voltage-output, 12-bit multiplying DAC. Error(LSBs) +-1/2. |
| MAX890LESA | MaximIC | 1A, current-limited, high-side P-channel switch with thermal shutdown |
| MAX6318MHUK48CW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX127BEAI | MaximIC | Multirange, +5V, 12-bit DAS with 2-wire serial interface. INL(LSB) +1,-1 |
| MAX6320PUK47DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX662AMJA | MaximIC | +12V, 30mA flash memory programming supply |
| MAX6309UK31D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,manual-reset input).Factory-trimmed reset thresholds 3.003(min),3.157(max) Nominal timeout period 1120ms. |
| MAX6320PUK26CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX3212EAI | MaximIC | +2.7V to 3.6V-powered, 1microA supply current, 3-driver/5-receiver, true RS-232 transceiver. |
| MAX786SEAI | MaximIC | Dual-output power-supply controller for notebook computers |
| MAX809ZEUR-T | MaximIC | Microprocessor reset circuit. Reset threshold 2.32V. Push-pull active-high reset. 2.5k increments. |
| MAX1270BCNG | MaximIC | Multirange, +5V, 8-channel, serial 12-bit ADC. INL(LSB) +1,-1 |
| MAX766CPA | MaximIC | -15V or adjustable output from -1V to -16V, high-efficiency, low IQ DC-DC inverter |
| DG403CY | MaximIC | Improved, dual, SPDT, two NO and two NC switches, high-speed analog switch. |
| MAX6312UK49D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 4.778(min) 5.023(max). Nominal timeout period 20ms. |
