| Част Не | Производител | Заявление |
|---|
| MAX544BESA | MaximIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1 |
| MAX322ESA | MaximIC | Precision, dual-supply, SPTS analog switch. |
| MAX4075BAEUA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 10V/V, noninverting gain 11V/V, -3dB BW 79kHZ. |
| MAX6317HUK38DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MXD1013SE070 | MaximIC | 3-in-1 silicon delay line. Output delay 70ns. |
| MAX923C/D | MaximIC | Dual micropower, low-voltage comparator. Intarnal 1.182V+-1% voltage reference. Internal programmable hysteresis. |
| MAX6306UK30D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 2.925(min),3.075(max) Nominal timeout period 20ms. |
| MAX795RCPA | MaximIC | Microprocessor supervisory circuit. Reset threshold 2.55V to 2.70V. Active-low reset. Backup-battery switchover. External switch driver. Chip-enable gating. |
| MAX4583CUE | MaximIC | Low-voltage, CMOS analog switch (three SPDT switches). |
| MAX530BEAG | MaximIC | +5V, low-power, parallel-input, voltage-output, 12-bit DAC. Error +-1. |
| MAX754C/D | MaximIC | CCFL backlight and LCD contrast controller. Positive LCD contrast. |
| MAX6320PUK31DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX4598C/D | MaximIC | Low-voltage, CMOS analog IC, combination single-ended 8-to-1/differential 4-to-1 multiplexer. |
| MAX5156BEEE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with configurable output. +5V single-supply operation. INL(LSB) +-1. |
| MAX794CSE | MaximIC | Microprocessor supervisory circuit. Reset threshold programmable. Active-low reset.Active-high reset.Low-line early warning output.Backup-battery switchover.External switch driver.Power-fail comparator.Watchdog input.Manual reset inp. |
| OP07CP | MaximIC | Low offset voltage operational amplifier. |
| MAX6306UK47D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.583(min),4.818(max) Nominal timeout period 140ms. |
| MXD1013SA040 | MaximIC | 3-in-1 silicon delay line. Output delay 40ns. |
| MAX6320PUK45AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1ms, watchdog timeout(typ) 1.6sec |
| MAX5151BEPE | MaximIC | Low-power, dual, 13-bit voltage-output DAC with serial interface. +3V single-supply operation. INL(LSB) +-2. |
| MAX6319MHUK43C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.300V, reset timeout(min) 140ms |
| MAX6318MHUK34BX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX6337US17D2-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 1.7V, reset timeout(min) 20ms. |
| ICL8069DMSQ2 | MaximIC | Low-voltage reference, 100 ppm/C - max temp. coefficient. |
| MAX858CUA | MaximIC | 5V or 3.3V output, step-up DC-DC converter. |
| MAX6307UK43D3-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.193(min),4.408(max).Nominal timeout period 140ms. |
| MAX338EJE | MaximIC | 8-channel, low-leakage, CMOS analog multiplexer. |
| MAX237CWG | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX726CCK | MaximIC | 2A step-down, PWM, switch-mode DC-DC regulator. |
| MAX6306UK50D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.875(min),5.125(max) Nominal timeout period 1ms. |
