| Част Не | Производител | Заявление |
|---|
| MAX134EQH | MaximIC | 3 3/4 digit DMM circuit. 3 separate address lines and 4-bit bidirectional data bus. |
| MAX241CWI | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| HI1-0201HS-5 | MaximIC | High-speed, CMOS, quad, SPST analog switch |
| MAX5154AEPE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with serial interface. +5V single-supply operation. INL(LSB) +-1/2. |
| MAX6317HUK25CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX4553EEE | MaximIC | +-15kV ESD-protected, quad, low-voltage, SPST analog switches (two NO and two NC switches). |
| MAX518BC/D | MaximIC | 2-wire serial 8-bit dual DAC with Rail-to-Rail outputs. TUE(LSB) 1.5. |
| MAX4613CUE | MaximIC | Quad, SPST, CMOS analog switch has two NC and two NO switches. |
| MAX409ACSA | MaximIC | 1.2microA max, single, single-supply op amp. |
| DG301CK | MaximIC | Dual, TTL compatible CMOS analog switch. |
| DG390BWE | MaximIC | General purpose CMOS dual analog switch. |
| MAX127BCNG | MaximIC | Multirange, +5V, 12-bit DAS with 2-wire serial interface. INL(LSB) +1,-1 |
| MAX3270EMN | MaximIC | 155Mbps/622Mbps clock recovery and data remiting IC with fully integrated phase/frequency detector. |
| MAX151AMRG | MaximIC | 300kHz 10-bit A/D converter with reference and T/H. TUE 1.0 LSB. |
| MAX6317HUK42DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.200V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX631ACSA | MaximIC | CMOS fixed +5V output voltage,adjustable output with 2 resistors step-up switching regulator. 5% output accuracy. |
| MAX6317HUK40DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX6378XR33-T | MaximIC | Ultra-low-power voltage detector, 3.3V |
| MAX6318LHUK34BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.400V min, reset timeout 20ms, typ watchdog timeout 6.3ms |
| DG417DY | MaximIC | Improved, SPST, NC analog switch |
| MAX6319LHUK42D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1120ms |
| MAX6319LHUK29C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 2.930V, reset timeout(min) 140ms |
| MAX6307UK43D1-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds4.193(min),4.408(max).Nominal timeout period 1ms. |
| MAX409BCPA | MaximIC | 1.2microA max, single, single-supply op amp. |
| MAX6318LHUK25CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 2.500V min, reset timeout 140ms, typ watchdog timeout 6.3ms |
| MAX6321HPUK46AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| ICL7641ECJD | MaximIC | Quad operational amplifier, 20mV |
| MAX4559CSE | MaximIC | +-15kV ESD-protected, low-voltage, CMOS analog multiplexer. |
| MAX713CPE | MaximIC | NiCd/NiMH battery fast-charge controller (negative voltage-slope detection scheme). |
| MAX6316MUK27AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
