| Част Не | Производител | Заявление |
|---|
| MAX188CEWP | MaximIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX6712MEXS-T10 | MaximIC | Microprocessor reset circuit with manual reset input. Reset threshold 4.38V. Output type active-high push-pull reset. |
| MAX6806US23-T | MaximIC | Voltage detector. Reset output active-low, push-pull. Threshold reset 2.3V |
| MAX1200BCMH | MaximIC | +5V single-supply, 1Msps, 16-bit self-calibrating ADC |
| DG407DWI | MaximIC | Improved, dual 8-channel CMOS analog multiplexer |
| MAX6241ACSA | MaximIC | Low-noise, precision, +4.096V output voltage reference. Max TEMPCO (ppm/C) 2.0. |
| MAX6319LHUK42A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1ms |
| MAX151AEWG | MaximIC | 300kHz 10-bit A/D converter with reference and T/H. TUE 1.0 LSB. |
| MAX4598EPP | MaximIC | Low-voltage, CMOS analog IC, combination single-ended 8-to-1/differential 4-to-1 multiplexer. |
| MAX184BEWG | MaximIC | High-speed 12-bit A/D converter with external reference input. 5 microsec. max conversion time. Linearity(LSB) +-1. |
| MAX706PCPA | MaximIC | Low-cost, microprocessor supervisory circuit. Precison supply-voltage monitor 2.63V. Active-high reset output signal. |
| MAX6503CMN005-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage open-drain. Standard temperature threshold(C) -5. |
| MAX9051BESA | MaximIC | Micropower, single-supply, single comparator + precision reference IC. |
| ICM7218AI/D | MaximIC | 8 digit LED display driver |
| MAX5354EUA | MaximIC | 10-bit voltage-output DAC. +5V single supply operation. |
| MAX759EWE | MaximIC | Adjustable, inverting carrent-mode PWM regulator. |
| MAX802TEPA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Watchdog input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX606EUA | MaximIC | Low-profile, 5V or 12V or adjustable, step-up converter for flach Memory/PCMCIA card. 1MHz switching frequency. |
| MAX770EPA | MaximIC | 5V or adjustable, high-efficiency, low IQ, step-up DC-DC controller |
| MAX195AEDE | MaximIC | 16-bit, 85ksps ADC with 10 microA shutdown |
| MAX2641EUT-T | MaximIC | 400MHz to 2500MHz SiGe ultra-low-noise amplifier |
| MAX5156AEPE | MaximIC | Low-power, dual, 12-bit voltage-output DAC with configurable output. +5V single-supply operation. INL(LSB) +-1/2. |
| MAX6335US24D3-T | MaximIC | Ultra-low-voltage, low power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 2.4V, reset timeout(min) 100ms. |
| MAX359MJE | MaximIC | Fault-protected analog 4 channel differential (2 of 8) multiplexer. |
| MAX856CSA | MaximIC | 3.3V or 5V output, step-up DC-DC converter. |
| MAX6318MHUK36CW-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6335US18D2-T | MaximIC | Ultra-low-voltage, low power microprocessor circuit with manual reset (reset output active-high, push/pull . Reset threshold(typ) 1.8V, reset timeout(min) 20ms. |
| MAX1243AESA | MaximIC | +2.7V to +5.25V, low-power, 10-bit serial ADCs in SO-8. INL (LSB) +1/2 |
| MAX6377UR22-T | MaximIC | Ultra-low-power voltage detector, 2.2V |
| MAX337EWI | MaximIC | Dual 8-channel, low-leakage, CMOS analog multiplexer. |
