| Част Не | Производител | Заявление |
|---|
| MAX6316MUK47CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX150ACWP | MaximIC | CMOS highspeed 8-bit A/D converter with reference and track/hold function. Error +,-1/2 LSB |
| MAX7409EUA | MaximIC | 5th-order, lowpass, switched-capacitor filter. Filter response bessel, operating voltage +5V |
| MAX6319MHUK50C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 5.000V, reset timeout(min) 140ms |
| MAX6318LHUK44AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.390V min, reset timeout 1ms,typ watchdog timeout 1.6sec |
| MAX6364PUT29-T | MaximIC | Low-power microprocessor supervisory circuit with auxiliary adjustable reset input. Reset threshold(typ) 2.93V. Active-low open-drain reset. |
| MAX6322HPUK46D-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1120ms |
| MAX883CSA | MaximIC | 5V or adjustable, low-dropout, low current, 200mA linear regulator. 1microA(max) shutdown(OFF) mode. |
| MAX6313UK29D3-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 2.857(min) 3.000(max).Nominal timeout period 140ms. |
| MAX6316MUK48AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX440MDI | MaximIC | High-speed video multiplexer/amplifier |
| MAX6317HUK27AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX816EPA | MaximIC | +-1% accuracy, low-power, microprocessor supervisory circuit. Push-pull active-low reset output, push-pull active-high reset output, manual reset, power-fail monitor, Vcc reset voltage adjustable. |
| MAX6250BCPA | MaximIC | Low-noise, precision, +5V output voltage reference. Max TEMPCO (ppm/C) 5.0. |
| MAX4175BFEUK-T | MaximIC | Single, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 25, 1+ (Rf/Dg) noninverting gain 26, -3dB BW 580kHz. |
| MAX4519EPD | MaximIC | Precision, dual 2-channel, low-voltage, CMOS analog multiplexer. Single-supply operation (+2.2V to +15V) or bipolar-supply operation (+-2.2V to +-8V). |
| MAX561C/D | MaximIC | +3.3V tranceiver with two EIA/TIA-562 receivers active in shutdown. |
| MAX6316MUK32AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX6378XR41-T | MaximIC | Ultra-low-power voltage detector, 4.1V |
| MAX6195BESA | MaximIC | Precision, micropower, low-dropout voltage reference. Output voltage 5.000V, initial accuracy +-5, temperature coefficient <10ppm. |
| MAX188CEPP | MaximIC | Low-power, 8-channel, serial 12-bit ADC. |
| MAX395C/D | MaximIC | Serially controlled, low-voltage, 8-channel SPST switch |
| MAX806TMJA | MaximIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| HI3-0508A-5 | MaximIC | Fault-protected analog 8 channel single-ended (1 of 8) multiplexer. |
| MAX3890ECB | MaximIC | +3.3V, 2.5Gbps, SDH/SONET 161 serializer with clock synthesis and LVDS inputs |
| MAX6241ACSA | MaximIC | Low-noise, precision, +4.096V output voltage reference. Max TEMPCO (ppm/C) 2.0. |
| MX7541AQ | MaximIC | CMOS 12 bit multiplying D/A converter. Error 1 LSB. |
| MAX750AESA | MaximIC | Adjuistable, step-down, current-mode PWM regulator. Inputs from 4V to 11V, up to 450mA load currents. |
| MAX187ACWE | MaximIC | +5V, low-power, 12-bit serial ADC. Error(LSB) +-1/2. |
| MAX1112C/D | MaximIC | 5 V, low-power, multi-channel, serial 8-bit ADC. 8-channel single-ended or 4-channel differential inputs |
