| Част Не | Производител | Заявление |
|---|
| MAX5191BEEI | MaximIC | Dual,8-bit, 40MHz, current/voltage, alternate-phase output DAC. |
| MAX3226EEAE | MaximIC | +-15kV ESD-protected, 1microA, 1Mbps, 3.0V to 5.5V, RS-232 transceiver with autoshutdown plus. |
| MAX1652EEE | MaximIC | High-efficiency, PWM, step-down DC-DC controller in 16-pin QSOP |
| MAX527CCNG | MaximIC | Calibrated quad, 12-bit, voltage-output DAC. INL(LSBs) +-1/2. Fast output settling 5micros. +-5V supply operation. |
| ICL8069DESA | MaximIC | Low-voltage reference, 100 ppm/C - max temp. coefficient. |
| MAX4555C/D | MaximIC | Force-sense switches (four indepedent SPST NC switches, two force switches, and two sense switches). |
| MAX6317HUK38AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.800V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MAX6314US47D4-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.70V. Reset timeout period(min) 1120ms. |
| MAX4611CPD | MaximIC | Low-voltage, quad, SPST, CMOS analog switches (four NC switches). |
| MAX508ACWP | MaximIC | Voltage-output, 12-bit DAC with internal reference. 8+4 data-bus widths. Error +-1/2. |
| MAX192AEAP | MaximIC | Low-power, 8-channel, serial 10-bit ADC. Error(LSB) +-1/2. |
| MX7503JQ | MaximIC | Low-power, monolithic, CMOS analog multiplexer. |
| MAX4270EEE | MaximIC | Dual, ultra-low-distortion, single-supply, 200MHz op apm with enable. Min gain 5V/V, single-supply operation +4.5V to +8.0V |
| MAX544AEPA | MaximIC | +5V, serial-input, voltage-output, 14-bit DAC. INL (LSB) +-1/2 |
| MAX6504CMN035-T | MaximIC | Low-cost, +2.7V to +5.5V micropower temperature switch. Output stage push-pull. Standard temperature threshold(C) -35. |
| MXD1013C/D050 | MaximIC | 3-in-1 silicon delay line. Output delay 50ns. |
| MAX6316LUK47BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6320PUK27DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 1.12sec, watchdog timeout(typ) 102ms |
| MAX6337US21D2-T | MaximIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 2.1V, reset timeout(min) 20ms. |
| MAX6808UR26-T | MaximIC | Voltage detector. Reset output active-low, open-drain. Threshold reset 2.6V |
| MAX6321HPUK30DY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX4274AOEUA | MaximIC | Dual, Rail-to-Rail, GainAmp op amp with precision internal gain-setting resistors. Rf/Rg inverting gain 9, 1+ (Rf/Dg) noninverting gain 10, -3dB BW 640kHz. |
| MAX3223ECPP | MaximIC | +-15kV ESD-protected, 1microA, 3.0 to 5.5V, 250kbps, RS-232 transceiver with AutoShutdown. |
| MAX6318MHUK27CX-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.700V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX5355EPA | MaximIC | 10-bit voltage-output DAC. +3.3V single supply operation. |
| MX7534SQ | MaximIC | Microprocessor-compatible, 14-bit DAC. INL +-2 LSB. |
| MAX437MJA | MaximIC | Low noise, high-precision op amp. 60MHz gain-bandwidth product. |
| MX7575KEQP | MaximIC | CMOS, microprocessor-compatible, fast conversion time 5 microsec, 8-bit ADC. INL +-1/2 LSB. |
| MAX491EEPD | MaximIC | +-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Full-duplex. Data rate 2.5Mbps. Slew-rate limited - no. Low-power shutdown - no. Receiver/driver enable - yes. Quiescent current - 300 microA. Number of transmitter on bus - 32. |
| MAX6316MUK31BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
