| Част Не | Производител | Заявление |
|---|
| MAX6322HPUK31A-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.080V, reset timeout(min) 1ms |
| MX565ASD | MaximIC | High speed 12-bit monolithic D/A converter. High stability buried zener 10V reference. Error +-1/2LSB |
| MAX6306UK42D2-T | MaximIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.095(min),4.305(max) Nominal timeout period 20ms. |
| MAX6313UK41D4-T | MaximIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 3.998(min) 4.203(max).Nominal timeout period 1120ms. |
| MAX3243EWI | MaximIC | 1microA supply current, true +3V to +5.5V RS-232 transceiver with AutoShutdown. |
| MX7248J/D | MaximIC | Complete, 12-bit voltage-output DAC. |
| MAX146ACPP | MaximIC | +2.7 V, low-power, 8-channel, serial 12-bit ADC. INL(LSB) +-1/2. |
| MAX6321HPUK36CX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.600V, reset timeout(min) 140ms, watchdog timeout(typ) 102ms |
| MAX6318LHUK33AY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 1ms, typ watchdog timeout 1.6sec |
| MAX1246AEEE | MaximIC | +2.7V, low-power, 4-channel, serial 12-bit ADC. INL (LSB) +1/2,-1/2 |
| MX7828LN | MaximIC | CMOS, high-speed, 8-bit ADC with multiplex. Error (LSB) +-1/2 |
| MAX4120EEE | MaximIC | Quad, 300MHz -3dB bandwidth, low-power, current feedback amplifier. |
| MAX6320PUK37CZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 3.700V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec |
| MAX1403EAI | MaximIC | +3V, 18-bit, low-power, multichannel, oversampling (sigma-delta) ADC |
| MAX6321HPUK39AX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.900V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX6316MUK29BY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.930V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX6318MHUK25BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 2.500V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX122ACAG | MaximIC | 500ksps, 12-bit ADCs with track/hold and reference, INL (LSBs) +3/4 |
| MAX6318LHUK31DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.080V min, reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX3223ECAP | MaximIC | +-15kV ESD-protected, 1microA, 3.0 to 5.5V, 250kbps, RS-232 transceiver with AutoShutdown. |
| MAX809REXR-T10 | MaximIC | Microprocessor reset circuit. Reset threshold 2.62V. Push-pull active-high reset. 10k increments. |
| MAX4501ESA | MaximIC | Low-voltage, SPST, CMOS analog switch. |
| MAX4580CPE | MaximIC | 1.25om, dual SPST, CMOS analog switch. Two NC (normally closed) switches. |
| MAX2411AEEI | MaximIC | Low-cost RF up/downconverter with LNA and PA driver. |
| MAX261ACWG | MaximIC | Microprocessor programmable universal active filter. Accuracy 1%. |
| MXD1005UA100 | MaximIC | 5-tap silicon delay line |
| MAX6318MHUK40DY-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 1.12sec, watchdog timeout(typ) 1.6sec |
| MAX5102AEUE | MaximIC | +2.7V to 5.5V, low-power, dual, parallel 8-bit DAC with Rail-to-Rail voltage output. INL (LSB) +-1 |
| MXL1014MJ | MaximIC | Quad precision op amp. |
| ICL7653CPA | MaximIC | Chopper-stabilized amplifier |
