| Част Не | Производител | Заявление |
|---|
| MX584KESA | MaximIC | Pin programmable precision voltage reference. Error +-10mV. |
| MAX4631EPE | MaximIC | Fault-protected, high-voltage, dual analog switch (two NO SPST switches). Fault protection +-40V with power off, +-36V with +-15V supplies. |
| ICL7614AMTV | MaximIC | Single operational amplifier, 2mV |
| MAX6321HPUK44DW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX2108CEG | MaximIC | Direct-conversion tuner IC. |
| ICL7642ECPD | MaximIC | Quad operational amplifier, 20mV |
| MAX4075BGESA | MaximIC | Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 30V/V, noninverting gain 31V/V, -3dB BW 89kHz. |
| MAX6318MHUK46AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 1ms, watchdog timeout(typ) 25.6sec |
| MAX807NEWE | MaximIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.575V |
| MAX5158EPE | MaximIC | Low-power, dual, 10-bit voltage-output DAC with internal gain of +2V/V. +5V single-supply operation. |
| MX7224UQ | MaximIC | CMOS 8-bit DAC with output amplifier. Error +-1 LSB. |
| MAX392CPE | MaximIC | Precision, quad, SPST analog switch |
| MAX4571CAI | MaximIC | Serially controlled, clickless audio/video switch. 2-wire, fast-mode, IIC-compatible. |
| MAX753EPE | MaximIC | CCFL backlight and LCD contrast controller. Negative LCD contrast. |
| MAX6316MUK48AZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1ms, typ watchdog timeout 25.6sec |
| MX7545GCQ | MaximIC | CMOS 12-bit buffered multiplying DAC. Error +-1/2 LSB. +-1 LSB gain accuracy. |
| MAX4518EEE | MaximIC | Precision, 4-channel, low-voltage, CMOS analog multiplexer. Single-supply operation (+2.2V to +15V) or bipolar-supply operation (+-2.2V to +-8V). |
| MAX6318MHUK48BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.800V, reset timeout(min) 20ms, watchdog timeout(typ) 25.6sec |
| MAX697CPE | MaximIC | Microprocessor supervisory circuit. Onboard gating of chip enable signals. |
| MAX6318LHUK33DY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.300V min, reset timeout 1.12sec, typ watchdog timeout 1.6sec |
| MAX6348XR34-T | MaximIC | Microprocessor supervisory circuit (reset output active-low, open-drain). Reset threshold (typ) 3.400V. Order increment 10k |
| MAX6322HPUK26B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 20ms |
| MAX339MJE | MaximIC | Dual 4-channel, low-leakage, CMOS analog multiplexer. |
| MAX6320PUK49AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.900V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| MAX362EJE | MaximIC | Precision, quad, SPST analog switch. |
| MAX153EAP | MaximIC | 1Msps, microprocessor-compatible, 8-bit ADC with 1microA power-down. |
| MXD1000SA200 | MaximIC | 5-tap silicon delay line |
| MAX6318LHUK48DX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input, reset output active-low, push/pull; active-high,push/pull).Factory-trimmed reset threshold (typ) 4.800V, min reset timeout 1.12sec, typ watchdog timeout 102ms |
| MAX6350ESA | MaximIC | Low-noise, +5V voltage reference. Max tempco 1.5ppm/C |
| ICL7612BCPA | MaximIC | Single operational amplifier,5mV |
