| Част Не | Производител | Заявление |
|---|
| MAX7412EUA | MaximIC | 5th-order, lowpass, elliptic, switched-capacitor filter. Transition ratio r = 1.6, operating voltage +3V |
| MAX4532CWP | MaximIC | Low-voltage, CMOS analog ICs configured as three single-pole/double-throw switch. |
| MAX6314US45D1-T | MaximIC | 68H11/bidirectional-compatible microprocessor reset circuit. Reset threshold(nom) 4.50V. Reset timeout period(min) 1ms. |
| MAX6316LUK35DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.500V, min reset timeout 1.12sec, typ watchdog timeout 25.6sec |
| MAX6316MUK47AX-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.700V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX1701EEE | MaximIC | 1-cell to 3-cell, high-power (1A), low-noise, step-up DC-DC converter. |
| MAX6379UR41-T | MaximIC | Ultra-low-power voltage detector, 4.1V |
| MAX6316MUK27BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 2.700V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX991ESA | MaximIC | Dual, micropower, low-voltage, Rail-to-Rail I/O comparator. Push/pull output stage sinks and sources. |
| MAX6316LUK45AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.500V, min reset timeout 1ms, typ watchdog timeout 6.3ms |
| MAX1091ACEI | MaximIC | 250ksps, +3V, 8-channel single-ended/4-channel pseudo-differential, 10-bit ADCs with +2.5V reference and parallel interface. INL (LSB) 0.5 |
| MAX8867C/D30 | MaximIC | Low-noise, low-dropout, 150mA linear regulator. Preset output voltage 3.00V |
| DG304CJ | MaximIC | CMOS dual and quad analog switch. |
| MAX4622ESE | MaximIC | Low on-resistance 3om(typ), 5om(max), dual, SPDT, analog switch has two NO and two NC poles. |
| MAX6357TYUT-T | MaximIC | Triple-voltage microprocessor supervisory circuit with manual reset. Reset threshold 3.08V (Vcc5) and 2.19V (Vcc3). Active-low push-pull reset 3V. |
| MAX271CWG | MaximIC | Digitally-programmed, dual 2nd-order continuous lowpass filter. |
| MAX4617ESE | MaximIC | Low-woltage, high-speed, CMOS analog IC configured as 8-channel multiplexer |
| MAX4166EPA | MaximIC | Single, high-output-drive, precision, low-power, single-supply +2.7V to +6.5V, Rail-to-Rail I/O op amp with shutdown. |
| MAX652ESA | MaximIC | 3V or adjustable, high-efficiency, current-limited control scheme, step-down DC-DC controller. |
| MXD1000C/D150 | MaximIC | 5-tap silicon delay line |
| MAX6347UR42-T | MaximIC | Microprocessor supervisory circuit (reset output active-high, push-pull). Reset threshold (typ) 4.200V. Order increment 10k |
| MAX6320PUK41CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.100V, reset timeout(min) 140ms, watchdog timeout(typ) 6.3ms |
| MAX6312UK35D2-T | MaximIC | Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.413(min) 3.588(max). Nominal timeout period 20ms. |
| DG306CK | MaximIC | CMOS dual and quad analog switch. |
| MAX6321HPUK32CY-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.200V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX3187CAX | MaximIC | +-15kV ESD-protected, EMC-compliant, 230kbps, dual RS-232 serial port for motherboards/desktops. |
| MAX807LEPE | MaximIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.675V |
| MXL1001CH | MaximIC | Precision operational amplifier |
| MAX6317HUK46BZ-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 20ms, typ watchdog timeout 25.6sec |
| MAX6316MUK46CW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 140ms, typ watchdog timeout 6.3ms |
