| Част Не | Производител | Заявление |
|---|
| MAX6350EPA | MaximIC | Low-noise, +5V voltage reference. Max tempco 1.5ppm/C |
| MAX6304CUA | MaximIC | +5V, low-power microprocessor supervisory circuit with adjustable reset/watchdog (active-high reset, push/pull reset output. |
| MAX6319MHUK34B-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 3.400V, reset timeout(min) 20ms |
| MX7503C/D | MaximIC | Low-power, monolithic, CMOS analog multiplexer. |
| MAX6321HPUK42AX-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 1ms, watchdog timeout(typ) 102ms |
| MAX5480ACEE | MaximIC | 8-bit parallel DAC. Error(LSB) +-1/2. |
| MAX6333UR20D1-T | MaximIC | Ultra-low-voltage, low power microprocessor reset circuit. Reset threshold(typ) 2.0V, reset timeout(min) 1ms. |
| MAX6321HPUK28DW-T | MaximIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.800V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX4074AFEUK-T | MaximIC | Micropower, Rail-to-Rail, fixed-gain, single, GainAmp op amp. Inverting gain 1.5V/V, noninverting gain 2.5V/V, -3dB BW 180kHZ. |
| MAX3875EHJ | MaximIC | 2.5Gbps, low-power, +3.3V clock recovery and data retiming IC. |
| MX7575KN | MaximIC | CMOS, microprocessor-compatible, fast conversion time 5 microsec, 8-bit ADC. INL +-1/2 LSB. |
| MAX6318MHUK45DZ-T | MaximIC | Microprocessor supervisory circuit with watchdog input (watchdog input,reset output active-high,push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.500V, reset timeout(min) 1.12sec, watchdog timeout(typ) 25.6sec |
| MAX203CPP | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX4572EAI | MaximIC | Serially controlled, clickless audio/video switch. 2-wire, fast-mode, IIC-compatible. |
| MAX222C/D | MaximIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MX7534SD | MaximIC | Microprocessor-compatible, 14-bit DAC. INL +-2 LSB. |
| MAX778LEPA | MaximIC | Low-voltage input, step-up DC-DC converter |
| MAX3232ECUP | MaximIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
| ICL7642EC/D | MaximIC | Quad operational amplifier, 20mV |
| MAX6319LHUK38C-T | MaximIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-low,push/pull and active-high, push/pull).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 140ms |
| MAX208EAG | MaximIC | +5V RS-232 transceiver with 0.1 microF external capacitors |
| MAX487EEPA | MaximIC | +-15kV ESD-protected, low-power, RS-485/RS-422 transceiver. Half-duplex. Data rate 0.25Mbps. Slew-rate limited - yes. Low-power shutdown - yes. Receiver/driver enable - yes. Quiescent current - 120 microA. Number of transmitter on bus - 128. |
| MAX6320PUK44AW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.390V, reset timeout(min) 1ms, watchdog timeout(typ) 6.3ms |
| DG303ABK | MaximIC | Quad, TTL compatible CMOS analog switch. |
| MAX6317HUK25CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX312CSE | MaximIC | 10Om, quad, SPST, CMOS analog switch |
| MAX6317HUK31BW-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX126BCAX | MaximIC | 2x4-channel, simultaneous-sampling 14-bit DAS. INL (LSB) +4,-4 |
| MAX6320PUK42CY-T | MaximIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input, reset output active-low, open-drain).Factory-trimmed reset threshold(typ) 4.200V, reset timeout(min) 140ms, watchdog timeout(typ) 1.6sec |
| MAX3222ECPN | MaximIC | +-15kV ESD-protected, down to 10nA, 3.0V to5.5V, up to 1Mbps, true RS-232 transceiver. |
