| Част Не | Производител | Заявление |
|---|
| MAX6307UK36D1-T | MaximIC | "Multiple-input, programmable reset IC (open-drain reset output,factory-set reset threshold on Vcc,1additional undervoltage reset input,negative/overvoltage reset inp.).Factory-trimmed reset thresholds3.510(min),3.690(max).Nominal timeout period 1ms." |
| MX7536BD | MaximIC | "Microprocessor-compatible, 14-bit D/A converter. Accuracy +-1 LSB." |
| MAX223CWI | MaximIC | "+5V-powered, multichannel RS-232 driver-receiver." |
| MAX207EENG | MaximIC | "+-15kV ESD-protected, +5V RS-232 transceiver" |
| ICL7653BCTV | MaximIC | Chopper-stabilized amplifier |
| MAX6321HPUK46CZ-T | MaximIC | "Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 4.630V, reset timeout(min) 140ms, watchdog timeout(typ) 25.6sec" |
| MAX815KESA | MaximIC | "+-1% accuracy, low-power, microprocessor supervisory circuit. Reset trip threshold (min) 4.75V (max) 4.85V, push-pull active-low reset output, manual reset, power-fail monitor, watchdog circuit." |
| MAX4131EUA | MaximIC | "Single, wide-bandwidth, low-power, +2.7V to +6.5V single-supply operation, Rail-to-Rail I/O op amp. 25microA shutdown function." |
| MAX6312UK32D2-T | MaximIC | "Multiple-input, programmable reset IC(push/pull reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual-reset input). Factory-trimmed reset thresholds 3.120(min) 3.280(max). Nominal timeout period 20ms." |
| ICL7129ACJL | MaximIC | 4-1/2 digit single-ship A/D converter with LCD driver |
| MAX260ACNG | MaximIC | Microprocessor programmable universal active filter. Accuracy 1%. |
| MAX4541C/D | MaximIC | "Low-voltage, single-supply dual SPST analog switch." |
| MAX6318LHUK34BX-T | MaximIC | "Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 3.400V min, reset timeout 20ms, typ watchdog timeout 102ms" |
| MAX4075AOEUA | MaximIC | "Micropower, Rail-to-Rail, fixed-gain, dual, GainAmp op amp. Inverting gain 9V/V, noninverting gain 10V/V, -3dB BW 90kHZ." |
| MAX145BC/D | MaximIC | "+2.7 V, low-power, 2-channel, 108 ksps, serial 12-bit ADC. INL(LSB) +-1." |
| MAX4602EPE | MaximIC | "Low on-resistance (2.5om max), quad, SPST, CMOS analog switches (four NO switches)." |
| LH0101CK | MaximIC | Power operational amplifier |
| MX390SD | MaximIC | "Quad, 12-bit, microprocessor-compatible DAC. INL(LSBs) +-3/4." |
| DG445DY | MaximIC | "Improved, quad, SPST analog switch" |
| MAX1672C/D | MaximIC | Step-ur/down DC-DC converter in QSOP package |
| MAX6317HUK32DW-T | MaximIC | "Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-high, push/pull).Factory-trimmed reset threshold (typ) 3.200V, min reset timeout 1120ms, typ watchdog timeout 6.3ms" |
| MAX809REXR-T | MaximIC | Microprocessor reset circuit. Reset threshold 2.62V. Push-pull active-high reset. 2.5k increments. |
| MAX6012BEUR-T | MaximIC | "Precision, low-power, low-dropout, SOT23-3 voltage reference. Output voltage 1.250V, input voltage 2.5V to 12.6V." |
| MAX7221ENG | MaximIC | "Serially interfaced, 8-digit LED display driver. Slew-rate limited drivers for lower EMI. SPI, QSPI, Microwire serial interface." |
| MAX973EPA | MaximIC | "Ultra-low-power, open-drain, dual comparator. Internal precision reference 1%. Internal hysteresis yes." |
| MAX4542EPA | MaximIC | "Low-voltage, single-supply dual SPST analog switch." |
| MAX6310UK39D3-T | MaximIC | "Multiple-input, programmable reset IC(push/pull reset output,factory-set reset threshold on Vcc,1 additional undervoltage reset input,negative overvoltage reset input).Factory-trimmed reset thresholds 3.803(min),3.998(max). Nominal timeout period 140ms." |
| MAX6315US30D2-T | MaximIC | Open-drain microprocessor reset circuit. Reset threshold(nom) 3.00V. Reset timeout period(min) 20ms. |
| MAX392C/D | MaximIC | "Precision, quad, SPST analog switch" |
| MAX807MEWE | MaximIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.425V |
